T111 Anchor Bolt
- Type:T111
- Payment Terms:L/C, T/T.
- Trading Terms:EXW, FOB, CFR, CIF.
We're here to help:
Easy ways to get the answers you need.
Introduction
• Brief Introduction
T111 anchor bolt is one of the T-thread self-drilling hollow injection anchor bolt. It is made of seamless steel pipe with thick wall. In addition, surface thread-shaping techology is taken. With a bit at the anchor head, it is easy to cut through various rocks. With the continous international standard wave-shapethread, this anchor can be used to frill holes with help of bit. With the high-strength coupling elongated by mechanical cutting technology, any length could be available. Therefore, drilling, grouting, and anchoring can be carried out at one time.
• Specifications
Hollow Anchor Bar
• Features
1.Suitable for difficult ground conditions
2.A high rate of installation since drilling, placing and grouting can be performed in one single operation
3.Self drilling system eliminates the requirement for a cased borehole
4.Installation with simultaneous drilling and grouting possible
5.Easy installation in all directions, also upwards
6.Suitable for working in limited space, height and in areas of difficult access
•Application
• Radial bolting
• Slope stabilization
• Fore-poling
• Micro injection pile
• Face stabilization
• Temporary support anchor
T111 anchor bolt is one of the T-thread self-drilling hollow injection anchor bolt. It is made of seamless steel pipe with thick wall. In addition, surface thread-shaping techology is taken. With a bit at the anchor head, it is easy to cut through various rocks. With the continous international standard wave-shapethread, this anchor can be used to frill holes with help of bit. With the high-strength coupling elongated by mechanical cutting technology, any length could be available. Therefore, drilling, grouting, and anchoring can be carried out at one time.
• Specifications
Hollow Anchor Bar
| Size | Outer Dia. (mm) |
Inner Dia. (mm) |
Ultimate Load (KN) |
Yield Load (KN) |
Thread | Weight (Kg/m) |
|||||||
| T111/82 | 111 | 79 | 2640 | 2000 | R | 25.0 | |||||||
| T111/75 | 111 | 75 | 3650 | 2750 | R | 34.5 |
• Features
1.Suitable for difficult ground conditions
2.A high rate of installation since drilling, placing and grouting can be performed in one single operation
3.Self drilling system eliminates the requirement for a cased borehole
4.Installation with simultaneous drilling and grouting possible
5.Easy installation in all directions, also upwards
6.Suitable for working in limited space, height and in areas of difficult access
•Application
• Radial bolting
• Slope stabilization
• Fore-poling
• Micro injection pile
• Face stabilization
• Temporary support anchor
Accessories
The accessories include the anchor coupling, anchor nut, anchor plate and centralizer. Blow are the specifications for accessories.
•Anchor Coupler
• Anchor Nut
• Anchor Plate
•Centralizer
•Anchor Coupler
| Size | Outer Dia. (mm) |
Length (mm) |
Thread (L/R) |
Weight (Kg) |
|||||||||
| T111 | 140 | 250 | R | 12.6 | |||||||||
• Anchor Nut
| Size | Type | Key Size (mm) |
Length (mm) |
Thread (L/R) |
Weight (Kg) |
||||||||
| T111 | Hex Nut | 150 | 120 | R | 10.20 | ||||||||
• Anchor Plate
| Size | Type | Dimension (mm) |
Thickness (mm) |
Hole Dia. (mm) |
Weight (Kg) |
||||||||
| T111/82 | Flat Plate | 300*300 | 80 | 130 | 47.80 | ||||||||
| T111/75 | Flat Plate | 350*350 | 90 | 130 | 76.80 | ||||||||
•Centralizer
| Size | Outer Dia. (mm) |
Length (mm) |
Weight (Kg) |
||||||||||
| T111 | 170 | 50 | 1.80 | ||||||||||
Drill Bit
| Type | Size | Diameter (mm) | |||||||||
| EX | T111 | ø220 | |||||||||
| ESS-F | T111 | ø200 | |||||||||
| Clay Bit | T111 | ø220 |
Inquiry